New product risk assessment

Figure 01 / 12

The population that monitoring actually sees

8,358 of 8,400 source items enter this monitoring calculation. The missing 42 items are a coverage gap, not evidence of low risk. Reconcile stable identifiers and amounts where appropriate before interpreting the alert rate.

Figure data and text version

Population state	Items
Included in monitoring	8,358
Absent from this run	42

A cross-border payout feature changes parties, corridors, data handoffs, and operating volumes. The assessment should lead to observable changes in monitoring coverage.

Reconcile the new population and verify that its evidence reaches the intended cases.

All amounts, rates, capacity limits, and outcomes in this case are synthetic. The three conditions are separate assumptions for comparison. A better result in the response condition is not measured proof that the proposed control causes that improvement. The figures expose the calculation and its limits; a real deployment needs its own evidence.

Read the result

The daily source population is 8,400 items, but 42 are outside the completed monitoring run. The included population creates 316 hits and 300 unique cases. With 55 cases already open and capacity for 343, the queue closes at 12. Coverage, duplicate work, and staffing are separate causes; reducing one number does not prove that the overall control improved.

Figure 02 / 12

From scenario hits to unique cases

316 raw hits become 300 cases after removing 16 repeated references to the same case under the stated merge rule. Deduplication should reduce duplicate work while retaining the underlying events and reasons. It must not merge unrelated activity merely because values look similar.

Figure data and text version

Stage	Count
Raw scenario hits	316
Duplicate references	16
Unique cases	300

Figure 03 / 12

The queue balance is an accounting identity

Opening backlog 55 + arrivals 300 − completed cases 343 = closing backlog 12. Completion is capped by both available work and the stated capacity. This identity is useful even when average handling times are uncertain.

Figure data and text version

Movement	Cases	Definition
Opening backlog	55	Unresolved at window start
New cases	300	Unique arrivals in this window
Completed	343	Reached a defined completion state
Closing backlog	12	Unresolved at window end

Figure 04 / 12

Backlog accumulates across uneven days

This deterministic six-day example applies a stated daily arrival multiplier and a constant completion capacity. Unused capacity does not carry forward as completed work. The series is a workload illustration; it omits variable case durations and specialist routing. Horizontal positions are the labeled observations or scenarios; equal spacing does not imply equal numerical increments.

Figure data and text version

Day	Closing backlog
D1	12
D2	0
D3	17
D4	124
D5	111
D6	0

Figure 05 / 12

Arrivals and completions need separate plots

The service line cannot exceed the work available that day. A team can complete more cases than arrive while clearing an opening backlog. Conversely, stable staffing can coexist with a growing queue when arrivals remain higher than capacity. Horizontal positions are the labeled observations or scenarios; equal spacing does not imply equal numerical increments.

Figure data and text version

Day	Arrivals	Completions
D1	300	343
D2	255	267
D3	360	343
D4	450	343
D5	330	343
D6	210	321

Figure 06 / 12

An illustrative age profile of open work

The closing backlog is 12 cases. The 50/30/remainder split is an explicit illustrative age allocation, not a distribution inferred from the arrival model. Production age buckets must come from each case’s actual receipt and status history.

Figure data and text version

Age bucket	Open cases
Under one day	6
One to three days	4
Over three days	2

Figure 07 / 12

Completion outcomes are not criminal labels

Of 343 completed review tasks, 58 are referred for further assessment, 41 need another evidence action, and 244 close under the stated procedure. These are operational outcomes. None is a probability of money laundering or a substitute for a reporting decision.

Figure data and text version

Review disposition	Tasks
Referred for assessment	58
Further evidence action	41
Closed under procedure	244

Figure 08 / 12

Known-event tests assess specific coverage

The injected test set contains 100 known test events designed to exercise build the risk assessment from flows. The system surfaces 96. That 96% detection result measures this constructed test set only; it does not establish population-wide detection of illicit activity.

Figure data and text version

Measure	Count	Interpretation
Injected known events	100	Defined test population
Detected by the scenario	96	Expected evidence reached the control
Not detected	4	Investigate data, logic, and delivery
Real-world illicit prevalence	Unknown	Not inferred from this test

Figure 09 / 12

Data quality has several independent dimensions

Each row is a different field requirement over the same source population. Completeness alone does not establish that values are accurate or current. The case uses explicit illustrative missing counts to show how data quality can affect scenario coverage.

Figure data and text version

Field requirement	Present	Absent
Party reference	8,383	17
Event time	8,358	42
Counterparty context	8,274	126

Figure 10 / 12

Type the relationship before drawing an inference

This evidence map distinguishes a customer relationship, a transfer, and a case reference. The links support build the risk assessment from flows; they do not imply common ownership or intent. A shared data point is a lead whose meaning depends on source, time, and context.

Figure data and text version

From	To	Relationship
New product risk assessment	Counterparty A	Observed transfer
New product risk assessment	Profile record	Declared business
Counterparty A	Case record	Evidence reference
Profile record	Case record	Context for review

Figure 11 / 12

Case clocks start from defined events

A legal deadline, an internal response target, and an evidence-expiry date can start from different events. The hours here are internal teaching targets only. They are not BSA, sanctions, consumer-protection, or other statutory deadlines.

Figure data and text version

Event	Relative time	Operational meaning
Source event	T0	Activity occurred
Data arrival	T0 + 2 hours	The monitoring system learned it
Case created	T0 + 3 hours	Work entered an owned queue
Internal review target	T0 + 27 hours	Illustrative 24-hour target from case creation
Disposition	Recorded separately	Use actual decision and reporting records

Figure 12 / 12

The end-to-end delivery contract

The scenario is incomplete until the intended evidence reaches an owned case. For build the risk assessment from flows, verify source coverage, hit creation, queue acceptance, reviewer access, and final disposition separately. A green job status proves only that a job reported completion.

Figure data and text version

Boundary	Acceptance evidence
Source to scenario	8358 included source items; 42 missing
Scenario to case	316 hits linked to 300 unique cases
Case to reviewer	Required evidence visible under the reviewer role
Reviewer to outcome	Disposition, rationale, and any separate reporting decision retained

Connect the result to the system

Reconcile the new population and verify that its evidence reaches the intended cases.

Check the population, evidence, permitted action, and actual effect together. A balanced calculation can still use the wrong population; a successful response can still leave an unknown financial outcome. The case’s numerical result applies only to its stated assumptions.